Application Tips

Glass surface must be as clean as possible to ensure product bonds to glass directly.

Use high quality glass cleaner, personally I like Stoner's "Invisible Glass". Avoid using ammonia based cleaners.

If windshield has silicone build up, car wash wax residue a wax pre cleaner with light abrasive or automotive clay bar will remove and stubborn contaminants

It is recommended that you do not apply in direct sunlight as product could evaporate immediately after you apply it.

Use long strokes vertically then horizontally to provide even coating. If you are doing large windshield it is advisable you go half section at a time.

Let set up for about 2 min max, then buff off immediately with a clean paper towel. It may appear that the coating will not wipe off by be patient and keep rubbing. If necessary take another dry paper towel and rub in a circular motion. 

Do not let product air dry otherwise it will take some elbow grease to get the remainder off.

For larger vehicles with a lot of glass (minivans) you may need two applicators. To maximize product , do the windshield first then two side windows. Re coat the windshield around wiper area to increase durability. The remainder can be used on rear windows and mirrors if desired..

After 6 months , second application will last even longer.

Instructional Video

Manufacturer's Instructions
http://www.aquapel.com/PDF/ApplyAquapel.pdf